Garage door repair may often be done by the homeowner themselves. There are at least 5 simple things to examine, prior to calling a professional. Some repair works are incredibly easy. For instance, a stiff or a squeaky door will simply need a good cleaning and lubrication. Other repairs, such as repairing a torsion spring, are exceptionally hazardous and need assistance from an expert.
Before proceeding to the repair, make sure to disconnect your garage door opener, so that you do not get an electric shock while you are fixing your garage door. You will most likely be standing on a ladder, which is a very bad place to get an electric shock, since you might also fall off the ladder. Likewise, remember to wear safety glasses when dealing with power tools.
Here is a list of things to check before calling for a professional for your garage door repair work:
1. Inspect the Metal Tracks for Damages
This easy garage door repair work pointer might typically solve the problem very quickly. The metal tracks often may have damages or bumps. If you find any such damages, strike the damaged part of the track with a wood block and a hammer to align the track.
2. Inspect the Alignment of the Tracks
If the tracks are not lined up well, they may be causing the door not to work. It’s not always necessary to loosen the tracks; you can simply try to loosen up the bolts or screws and to tap the tracks a little into position. Utilize a level to check the positioning of the tracks. Aligned tracks will let you be finished with your garage door repair in no time.
3. Tidy and Dry the Tracks
Even though it may sound obvious, but hardened dirt and old lube might be the cause of the garage door sticking. In this case, your garage door repair work might include merely cleaning the tracks then drying them. You can utilize regular cleaners to clean the tracks.
4. Lubricate the Tracks and the Rollers
Merely oiling both, the tracks and the rollers, can repair the issue and conclude your garage door repair work in no time. For lubrication, you might use a lubricant spray or a silicon spray. It is probably better to lube the tracks after cleaning them. In fact, any movable part will take advantage of lubrication.
5. Tightening up the Loose Bolts and Screws
Bolts and screws tend to become loose with time. Try to inspect all of the screws and bolts associated with the opening/closing system of your door. In some cases, merely tightening them might resolve the entire problem. If you can not tighten the screws, due to the fact that the holes themselves have actually become loose, then you can use a “wood filler” or pieces of typical wood to fill the holes.
What Not to Do?
If you have actually tried every one of the above services, and none of them have actually worked, the problem might be the door spring. However, it is encouraged not to perform your garage door repair if the issue appears to be the spring, particularly if it’s a torsion spring. Unfortunately, there have been numerous cases, where individuals have gotten injured or even killed by the garage door springs. Among the most typical injuries is a hit in the head, resulting in serious injury to Woodinville garage door repair.
If you have doubts your garage repair, by no means must you attempt it. It normally will not cost excessive. However, a professional will save you from any injuries.
